|
Print
Version
Product
Overview
CN-100
network analyzers offer
an extremely powerful yet
cost effective solution for today’s complex
networking requirements.
Test Ethernet or ATM networks with the multi-port CN-100
portable or rack mount
chassis which provide a standard
platform that is easy
to use, reducing training time
and the expense of multiple
testers. The CN-100’s performance
and scalability offers
the latest traffic generation
and analyzing capabilities
that support a variety
of protocols and media to
meet your needs for today and
tomorrow.

Key
Features
q
10/100
and Gigabit Dual Media Ethernet Interface
Modules
q
ATM Interface Modules
q
CN-100 Manager Software
q
Portable or Rack mount Chassis
q
Full
Line Rate Traffic Generation, Monitoring Capture
and
Analysis
q
Perform Simultaneous QoS Testing and Capture with detailed Histogram Statistics
q
Bert
Test on Both Ethernet and ATM Modules

REDUCE COST OF TESTING
q
Multiple interface
platform reduces training time and the need for multiple
testers
q
Lowest cost per
test port available- Reduces capital spending
q
Cost effective
Physical Interface Cards for supporting multiple
technologies provide full line rate generation, monitoring,
analysis and capture across each port. Software selectable
line rates are available for ATM and Ethernet
interfaces
q
Multiple users can
share resources by controlling individual
cards or ports on the same chassis, thus saving
more money
q
Easy-to-use
graphical user interface for configuration, data capture,
and real-time analysis
q
C-library and
Command Line Interface available for automated tests
q
AUTO TEST- factory
or user defined test suites, PASS/FAIL results
q
Field upgradeable
design architecture allows easy field upgrades for firmware,
software and hardware. The upgrades for future enhancements
to ensure the life of the product
APPLICATIONS
q
Ideal for
Installation & Maintenance, Network Commissioning, Manufacturing, QA and
Research & Development
q
Emulate end
equipment or transmission network equipment
q
Perform Functional
test, regression test and stress test
q
Conformance –
Verify product meets standards
q
Interoperability
– Verify product works with other products
q
Performance –
Verify product works under different traffic conditions
q
Fault Finding–
Reduce costly recalls of bad equipment
CN-100
MANAGER SOFTWARE
The CN-100 Manager
software tool allows multiple users to be
connected to one chassis and control the
CN-100 locally or remotely via a 10/100
Ethernet LAN. The CN-100 Manager can be used
to load redefined tests or user-defined tests
with full access to traffic generation,
monitoring, QoS statistics and histograms, and
full-line rate capture. Save test results with
detailed trending and report generation.
Chassis
CN-100p/r
The
CN-100p (portable) is a portable 2-Slot
chassis designed for field technicians to
easily perform daily installation and
maintenance for today’s electrical and fiber
networks. The CN-100r (rack mount) is portable
unit with rack mount hardware that can easily
mount in a rack.
Front Panel Keypad, LCD, Alarm LED's and LCD
display alarms, errors, and traffic status
while providing a PASS/FAIL result.
The 2-slot chassis can support any variety of
physical interface modules.
CN-1000
The
CN-1000 is a high density chassis designed to
maximize your testing capabilities.
The 12-Slot chassis can support any
variety of physical interface modules. For higher density applications just
assign a master chassis and daisy chain
additional units.
Interface
Modules
4-Port
10/100/1000 Dual Media Ethernet Module
Each
port has a RJ-45 for 10/100/1000 Mbps Copper
and a SFP Socket for Gigabit Fiber (multimode
or single mode) with media connection
auto-sense. The dual media interface provides
a space saving cost effective solution for
testing Ethernet. Each module generates,
monitors and captures Ethernet traffic at Full
Line rate.
|
10/100/1000Mbps
Dual Media Ethernet Interface |
Ports/Slots
|
4-Ports/
1-Slot
|
|
Connectors
|
4
RJ45 and 4 SFP Sockets
|
|
|
4-Port
10/100/1000 Mbps Copper RJ45
-
10BASE-T Full or
Half Duplex
-
100BASE-TX Full or
Half Duplex
-
1000BASE-T Full
Duplex or Half Duplex
4-SFP
Sockets (Hot swappable)
|
ATM
Interface Modules
The
ATM interface modules allow full line rate
generation, monitoring and capture across each
individual port. Dual port ATM interfaces are
available for OC-12/OC-3 (software selectable),
DS3, and E3 rates. The multi-rate cards provide
a high-density, yet cost effective solution for
your ATM
testing requirements.
|
ATM
Interface Modules |
|
O12c/OC-3c
(STM-4/STM-1) Single
Mode
Software
selectable 622mbps/155 Mbps
|
2-Ports/1-Slot
|
|
OC-12c/OC-3c
(STM-4/STM-1) Multimode
Software selectable 622mbps/155
Mbps
|
2-Ports/1-Slot
|
|
OC-12c/STM-4
Single Mode 622 Mbps
|
2-Ports/1-Slot
|
|
OC-12c/STM-4
Multimode 622 Mbps
|
2-Ports/1-Slot
|
|
OC-3c/STM-1
Single Mode 155 Mbps
|
2-Ports/1-Slot
|
|
OC-3c/STM-1
Multimode 155 Mbps
|
2-Ports/1-Slot
|
|
155
Mbps
UTP-5 CAT 5
|
2-Ports/1-Slot
|
|
DS3
45 Mbps
|
2-Ports/1-Slot
|
|
E3
34 Mbps
|
2-Ports/1-Slot
|

|